To Plaster Over Artex How Much?

Plastering over Artex, on the other hand, is not always as simple as people believe. When removing or covering an Artex surface, care must be taken depending on the contents of the material.

When covering an Artex surface, it is best to hire a professional or experienced plasterer. As a result, the average cost of plastering over Artex will vary depending on a variety of factors. These cost-influencing factors include the size of the area to be covered and the labor charge for hiring a professional. The cost of hiring a professional to plaster over an Artex ceiling ranges between £25 and £50 per M2.

Additional factors, such as the ease of access to an area, the height of your ceilings, and the age of your property, may influence the rate of these charges. Older homes are more likely to have Artex with asbestos in it, adding to the job's complexity. Asbestos is a dangerous fibrous substance that, when released into the environment, can cause severe respiratory issues and health problems. Until the mid-1980s, asbestos was added to Artex to increase its strength.

The table below shows how the average cost of plastering over Artex can vary depending on a variety of factors. Please keep in mind that the prices listed below are estimates and should only be used as a guide.

Project Description Covered Ground Labor Fees Total Cost Repainting an artexed ceiling 12 M² £200 £500 Asbestos-containing Artex removal 8 M² £180 £280 Plastering over asbestos-containing Artex 10 M² £250 £600

What Is the Process of Plastering Over Artex?

Plastering over an Artex surface can be an efficient method of interior decorating. Plastering, on the other hand, is a specialized trade that necessitates a certain level of skill, patience, and experience in order to achieve a high-quality finish. The secret to achieving a perfect finish when plastering over Artex is in the surface preparation.

A professional tradesperson will try to smooth out as many of the existing Artex's bumps and dimples as possible. Before any Artex is removed, it must be thoroughly inspected for any signs of possible asbestos. If asbestos is found in the Artex, it must be removed safely by a licensed professional. In most cases, non-asbestos Artex wall coverings can be removed with a wallpaper steamer and a scraper.

The plastering process can begin once all visible high spots have been removed. The area must be free of large debris, just like any other surface. The surface will then be liberally coated with PVA glue or another bonding agent.

Typically, the plasterer will apply two coats of bonding agent, allowing the first coat to completely dry before applying the second. The plaster can be applied once the PVA solution has completely dried. Typically, the plasterer will apply a thick coat of plaster to the surface, making sure that all visible Artex is adequately covered.

Because the density of the Artex requires more attention to cover, this can take longer than plastering over a general wall. Your professional will smooth the plaster with a trowel to achieve a thick, smooth coating over the Artex.

Smoothing the plaster and flattening any blemishes is the next step in plastering over Artex. The plasterer will smooth over the first coat of plaster with gentle pressure until it is perfectly even. /p>

A second coat of plaster is frequently applied to ensure that the Artex is completely covered and the surface is smooth. The plastering process is the same as if you were plastering over any other surface at this point, and it is often easier to apply.

Plastering over Artex by Hand

Providing your Artex surface is free of any asbestos, it may be possible for you to carry out the work at home yourself Plastering, on the other hand, is a skill that requires a great deal of patience and knowledge to achieve the best results. If you suspect that asbestos is present, never attempt to remove or disturb any Artex. Asbestos is a highly hazardous substance that can have long-term, serious health and respiratory consequences.

You should also consider that attempting to plaster over an Artex surface yourself will most likely take more time. You will need to give yourself more time to complete the project, as well as invest in the necessary tools and equipment. We always recommend that you hire an experienced professional plasterer to complete the work for you for the best results.

Potential Issues and Obstacles

Many people believe that doing their own plastering will save them both time and money. This, however, is not always the case. Plastering, as previously stated, is a professional trade that must be performed correctly in order to achieve a high-quality finish. If you try to plaster a surface yourself, you may end up with a low-quality finish and an unsightly surface. This is typically the case for most DIYers, and it may necessitate the removal and re-plastering of the entire wall or ceiling.

This is frequently more expensive and time consuming to correct than simply hiring a professional in the first place. You will also need to equip yourself with the necessary tools and materials in order to do the plastering yourself. Professional tools and materials can also be costly to purchase, particularly if you do not intend to use them again.

If you suspect that an Artex surface contains asbestos, you should immediately contact a professional contractor who can safely remove the substance for you. If you attempt to remove asbestos-containing Artex, you may face serious long-term health consequences.